Skip to main content

Three highway projects key to Port of Wilmington (NC) growth

Interstate 140.

Interstate 74 and US 74 improvements.

Cape Fear Skyway.

What do all three of these projects have in common? Obviously, a number of things. But for the operators of the Port of Wilmington, the three highway infrastructure projects are key to the continued growth and expansion of North Carolina's largest port.

The Port facility currently handles an annual 350,000 trucks, and that number is expected to double to 700,000 annual truck volume by 2020. The Port is currently expanding their container handling facilities along with ongoing dredging of the Cape Fear River to handle larger vessels.

The three highway projects are important to the Port - which is currently accessed only by surface streets. The upgrading of US 74 and construction of I-74 will allow for quick freeway access to points West and Northwest - Charlotte and Greensboro. The I-140 project in addition to the Cape Fear Skyway will provided a timely bypass around Wilmington's surface street. The two projects - if completed - would allow for quicker access to US 17 and points South, the previously mentioned I-74 and US 74 routes, I-40 towards Raleigh and the I-95 East Coast Backbone, and US 17 to coastal points to the North.

However, the possibility of all three projects being completed by 2020 is not as definite as the expansion plans of the Port. Interstate 140 will most likely be finished by 2020, but without the Cape Fear Skyway - a direct connection between the Port and the beltway will not be possible.

- The Cape Fear Skyway which most likely will be built as a toll road is still up in the air as the North Carolina Turnpike Authority gets off the ground and over additional funding issues from the state.

- Interstate 74 and US 74 improvement have been ongoing for decades in North Carolina. Soon, the route from Charlotte to Wilmington will be at a minimum a four lane divided highway, but not a complete freeway. Interstate 74 most likely will have small gaps between I-95 and Whiteville and also between Maxton and Laurinburg. Although these segments are rural, a full freeway standard would allow for quicker travel times of containers to and from the port. US 74 beyond Rockingham towards Charlotte is a four lane highway with no access control. Improvements to bypass Monroe to I-485 (Charlotte Outer Loop) and also around small towns like Wingate and Wadesboro will be necessary for optimum travel for inbound and outbound freight.

Story: Wilmington Port prepares for expansion ---WWAY-TV

Comments

Anonymous said…
If anyone has any information about the proposal for I-74 to actually come into Wilmington, it would be appreciated.
I keep seeing sites that indicate that I-74 will turn south and go to Myrtle Beach. (They already have I-73 going there).

Your editorial is an exceptionally correct piece about the port. The added tax base for those containers and the increased revenue from tourist should almost pay for the upgrading and building.
Also, every effort should be made to have US74 added to the U.S. Interstate Highway System to enable the Federal Government to pay ninety percent (90%) of the cost.
Meaning a $1 Billion upgrade from Charlotte to Wilmington would cost the state only $100 million.

The skyway bridge ($120 million) should be part of the I-74 as well, let the Fed's pay for 90% of that too!!

The interstate 3, through the smokey moutains is far more expensive and no one wants it either.

Email your congress and legislatures to tell them to get on the ball, so it will be complete at the same time the port is finished.
Unknown said…
Your blog is very unique and contains information regarding highway projects which can be useful for entrepreneurs. Africa Tenders | International Tenders

Popular posts from this blog

Old River Lock & Control Structure (Lettsworth, LA)

  The Old River Control Structure (ORCS) and its connecting satellite facilities combine to form one of the most impressive flood control complexes in North America. Located along the west bank of the Mississippi River near the confluence with the Red River and Atchafalaya River nearby, this structure system was fundamentally made possible by the Flood Control Act of 1928 that was passed by the United States Congress in the aftermath of the Great Mississippi River Flood of 1927 however a second, less obvious motivation influenced the construction here. The Mississippi River’s channel has gradually elongated and meandered in the area over the centuries, creating new oxbows and sandbars that made navigation of the river challenging and time-consuming through the steamboat era of the 1800s. This treacherous area of the river known as “Turnbull’s Bend” was where the mouth of the Red River was located that the upriver end of the bend and the Atchafalaya River, then effectively an outflow

Memphis & Arkansas Bridge (Memphis, TN)

  Like the expansion of the railroads the previous century, the modernization of the country’s highway infrastructure in the early and mid 20th Century required the construction of new landmark bridges along the lower Mississippi River (and nation-wide for that matter) that would facilitate the expected growth in overall traffic demand in ensuing decades. While this new movement had been anticipated to some extent in the Memphis area with the design of the Harahan Bridge, neither it nor its neighbor the older Frisco Bridge were capable of accommodating the sharp rise in the popularity and demand of the automobile as a mode of cross-river transportation during the Great Depression. As was the case 30 years prior, the solution in the 1940s was to construct a new bridge in the same general location as its predecessors, only this time the bridge would be the first built exclusively for vehicle traffic. This bridge, the Memphis & Arkansas Bridge, was completed in 1949 and was the third

California State Route 203 the proposed Minaret Summit Highway

California State Route 203 is an approximately nine-mile State Highway located near Mammoth Lakes in the Sierra Nevada Mountains of Mono County.  California State Route 203 as presently configured begins at US Route 395, passes through Mammoth Lakes and terminates at the Madera County line at Minaret Summit.  What is now California State Route 203 was added to the State Highway System in 1933 as Legislative Route Number 112.  The original Mammoth Lakes State Highway ended at Lake Mary near the site of Old Mammoth and was renumbered to California State Route 203 in 1964.  The modern alignment of the highway to Minaret Summit was adopted during 1967.   The corridor of Minaret Summit and Mammoth Pass have been subject to numerous proposed Trans-Sierra Highways.  The first corridor was proposed over Mammoth Pass following a Southern Pacific Railroad survey in 1901.  In 1931 a corridor between the Minarets Wilderness and High Sierra Peaks Wilderness was reserved by the Forest Service for po