Could a bond issue allow the Cape Fear Skyway to be toll free?

Yes, it is indeed possible.

The $550 Million Wilmington Bypass/Cape Fear Skyway Project is one of the several proposed NC Turnpike Authority (NCTA) projects.

In a recent Brunswick County Commissioners meeting, the NCTA presented an update to their Cape fear Skyway Toll Highway proposal. Afterwards, County Commissioner urged those in attendance to contact the 21st Century Transportation Committee in support of a bond issue that would help finance road construction throughout the state.

If built as a toll road, the tolls would only cover 50% of the cost causing the NCTA to look for other sources of 'gap funding', most likely from the state's General Fund. However, a member of the NCTA's Board of Directors, David Redwine, said that if a bond referendum is passed it could solve the funding gap problem for the Cape Fear Skyway. He also stated that tolling the highway is just a series of options to get the project underway.

Story: Wilmington Star-News

Commentary:

Well, the idea of a bond issue to pay for the Skyway not only caught the attention of the Brunswick County Commissioners, but it also made waves with the Editorial staff at the Star-News.

On Tuesday, the paper penned an editorial titled "Toll-free, if possible" voicing their support in "...the state should do everything in its power to avoid building [the Cape Fear Skyway] as a toll road."

They also point out and strongly urge (as it also has been in this blog as well) the legislature to phase down and ultimately eliminate the annual transfer of $170 million from the Highway Trust Fund to the General Fund. The suggestion has also been made by the 21st Century Transportation Committee, and it should come up in the upcoming short session of the NC Legislature.

The Star-News editorial also looks at the possibility of a state-wide bond issue along with county based sales tax increases (like the one recently approved in Horry County, South Carolina) to help fund highway projects.

It seems to me that the bond issue is being floated around as a trial balloon. If editorials and discussion of the possible bond issue continues, it may in fact make it to a state wide referendum in the near future.

Comments

The 1915-era Teilman Bridge (the only known Concrete Pony Truss Bridge in California)

The Teilman Bridge is a semi-abandoned structure over Fresno Slough west of Burrell siding near the intersection of Elkhorn Avenue and Elkhorn Grade. This structure is the only known Concrete Pony Truss Bridge constructed in California and was designed by Ingvart Teilman. Teilman's Bridge would open in late 1915 when the Elkhorn Grade was the primary road between Fresno and Coalinga. The structure would be replaced in 1991 but was left standing as it carries pipelines over Fresno Slough. Part 1; the history of the Teilman Bridge In the early Twentieth Century the most direct highway between Fresno and Coalinga followed the Elkhorn Grade. The Elkhorn Grade began at Fresno Slough a short distance west of Burrell siding. From Fresno Slough the Elkhorn Grade followed a generally southwestern course through San Joaquin Valley into the Kettleman Hills towards Coalinga. The Elkhorn Grade can be seen on the 1914 C.F. Weber map of Fresno Coun...

The Dummy Lights of New York

A relic of the early days of motoring, dummy lights were traffic lights that were placed in the middle of a street intersection. In those early days, traffic shuffled through busy intersections with the help of a police officer who stood on top of a pedestal. As technology improved and electric traffic signals became commonplace, they were also originally positioned on a platform at the center of the intersection. Those traffic signals became known as " dummy lights " and were common until traffic lights were moved onto wires and poles that crossed above the intersection. In New York State, only a handful of these dummy lights exist. The dummy lights are found in the Hudson Valley towns of Beacon and Croton-on-Hudson, plus there is an ongoing tug of war in Canajoharie in the Mohawk Valley, where their dummy light has been knocked down and replaced a few times. The dummy light in Canajoharie is currently...

The William Flinn (not Flynn) Highway - Pittsburgh's Misspelled Street

For decades if you traveled along PA Route 8 in Pittsburgh's North Hills suburbs, you would have noticed signs that read "William Flynn Highway" at every intersection. Even today, many businesses and residences have their addresses listed as XXXX William Flynn Highway. However, it's not William Flynn Highway, it is William FLINN Highway - and the gentleman who it is named for has a long and storied past in Pittsburgh's infrastructure history. William Flinn was born in England in 1851; however later that year, his family emigrated to the United States and would settle in Pittsburgh. A 10-year-old school dropout, Flinn grew interested in politics and would join the Allegheny County Republican Party in 1877 as a ward commissioner and a seat on the Board of Fire Commissioners. Flinn would serve in the Pennsylvania State House of Representatives and Senate from 1877 to 1902. (1) Flinn along with James J. Booth would found the Booth and Flinn construction firm ...

Gribblenation

Search This Blog