Skip to main content

Old NY 3 in Hannibal, New York

NY 3 between Hannibal and Fulton was placed on a new alignment during the late 1960s/early 1970s, possibly as part of the US/NY 104 super-two project that took place in the time. This page has photos of the old alignment of NY 3 in Hannibal. The old alignment is now known as Oswego CR 3. There is a dead end of Oswego CR 3 around where NY 3 and NY 104 currently intersect.

When I had this information on a page on a former website I used to help operate a number of years ago, I received an email from a gentleman by the name of Daniel Harmony who helped provide some additional background information for me. The information he provided was as follows:

"I was reading the narration you have posted concerning the western end of Oswego County 3, formerly NY 3, at Hannibal. The directional sign to the new NY 3 was installed at the time the new road opened. The roadway itself had been used to move traffic back and forth from the new alignment to the old during the construction phase. What you referred to as a driveway at the western end of CR 3 was built as a turn around (perhaps for motorists who missed the NY 3 directional). This was part of the original construction. I assume its true purpose was for snow plows to turn. When the new highway was built, the alignment entering the village was changed radically. As your picture shows, the original alignment was straight into the village from the old road. This was a particularly rough section of road with a narrow bridge just before entering the main square in the village.

By the way, up until some time in the early 1980's (I think), NY 3 ended in Hannibal. It had ended at the junction with US 104 when that road also ran through the village up until the early 1960's. NY 3 was extended west to NY 104A at Crocketts when a plan surfaced to construct some chemical waste disposal plant at the site of what was to have been the Sterling Nuclear Plant. One of the objections raised was that there was no adequate roadway to get to I-90. The state took over what had been town-maintained roads and did a total rebuild following the 1984 Transportation Bond Act (Rebuilding New York program)."

Peering over at the NY 3 and NY 104 intersection.

Looking east at Oswego CR 3. That is a driveway or more than likely, a snowplow turnaround.

END Oswego CR 3 shield westbound.


An old NY 3 shield (with NY on top of the shield) near the western end of Oswego CR 3. There appears to have been a period of time where travelers were asked to switch off between the new alignment and the old alignment. Here is an old NY 3 shield on Oswego CR 3 westbound that may have been used for that purpose.


Sources and Links:
Daniel Harmony (information)
Doug Kerr (photos and information)

Comments

Popular posts from this blog

Paper Highways: The Unbuilt New Orleans Bypass (Proposed I-410)

  There are many examples around the United States of proposed freeway corridors in urban areas that never saw the light of day for one reason or another. They all fall somewhere in between the little-known and the infamous and from the mundane to the spectacular. One of the more obscure and interesting examples of such a project is the short-lived idea to construct a southern beltway for the New Orleans metropolitan area in the 1960s and 70s. Greater New Orleans and its surrounding area grew rapidly in the years after World War II, as suburban sprawl encroached on the historically rural downriver parishes around the city. In response to the development of the region’s Westbank and the emergence of communities in St. Charles and St. John the Baptist Parishes as viable suburban communities during this period, regional planners began to consider concepts for new infrastructure projects to serve this growing population.  The idea for a circular freeway around the southern perimeter of t

Hernando de Soto Bridge (Memphis, TN)

The newest of the bridges that span the lower Mississippi River at Memphis, the Hernando de Soto Bridge was completed in 1973 and carries Interstate 40 between downtown Memphis and West Memphis, AR. The bridge’s signature M-shaped superstructure makes it an instantly recognizable landmark in the city and one of the most visually unique bridges on the Mississippi River. As early as 1953, Memphis city planners recommended the construction of a second highway bridge across the Mississippi River to connect the city with West Memphis, AR. The Memphis & Arkansas Bridge had been completed only four years earlier a couple miles downriver from downtown, however it was expected that long-term growth in the metro area would warrant the construction of an additional bridge, the fourth crossing of the Mississippi River to be built at Memphis, in the not-too-distant future. Unlike the previous three Mississippi River bridges to be built the city, the location chosen for this bridge was about two

Huey P. Long Bridge (New Orleans, LA)

Located on the lower Mississippi River a few miles west of New Orleans, the Huey P. Long Bridge is an enormous steel truss bridge that carries both road and rail traffic on an old-time structure that is a fascinating example of a bridge that has evolved in recent years to meet the traffic and safety demands of modern times. While officially located in suburban Jefferson Parish near the unincorporated community of Bridge City, this bridge’s location is most often associated with New Orleans, given that it’s the largest and most recognizable incorporated population center in the nearby vicinity. For this reason, this blog article considers the bridge’s location to be in New Orleans, even though this isn’t 100% geographically correct. Completed in 1935 as the first bridge across the Mississippi River in Louisiana and the first to be built in the New Orleans area, this bridge is one of two bridges on the Mississippi named for Huey P. Long, a Louisiana politician who served as the 40th Gove