California State Route 201

The second route I photo clinched on Monday was CA 201 from CA 245 west to CA 99. CA 201 is a 25 mile route which traverses much of central Tulare County and a small part of Fresno County. CA 201 is almost a two-lane roadway aside from a small part in Kingsburg. CA 201 westbound begins in a place known as Elderwood and is somewhat hilly being in the Sierra Foothills for the first couple miles.

CA 201 crosses the Kern-Friant Canal entering San Joaquin Valley.

In Yettem CA 201 junctions with the northern segment of the unsigned County Route J23 at Road 156.

West of Yettem CA 201 turns north and multiplexes CA 63 for two miles before cutting west towards Kingsburg.

The entire 16 miles of CA 201 west of CA 63 are a straight shot towards CA 99.

CA 201 has two major junctions before Kingsburg with County Route J19 on Road 80/Alta Avenue and County Route J31 at Road 56. I want to say J19 is still signed in Fresno County but it doesn't appear that J31 is signed at all.

Slightly before the Fresno County Line CA 201 crosses the Kings River. The Fresno County Line and city limit of Kingsburg are about a mile westward.

Just prior to CA 99 is Simpson Street along the railroad tracks which would have been US 99.

CA 201 ends at CA 99 and actually has appropriate "end" signage.

Prior to 1964 all of what is now CA 201 was part of LRN 131 west of Woodlake. The alignment of CA 201 is almost identical to LRN 131 which can be seen on the 1935 Tulare County Highway Map. CA 201 appears to have remained unsigned until 1969.

1935 Tulare County Highway Map

1964 State Highway Map

1969 State Highway Map

Comments

The 1915-era Teilman Bridge (the only known Concrete Pony Truss Bridge in California)

The Teilman Bridge is a semi-abandoned structure over Fresno Slough west of Burrell siding near the intersection of Elkhorn Avenue and Elkhorn Grade. This structure is the only known Concrete Pony Truss Bridge constructed in California and was designed by Ingvart Teilman. Teilman's Bridge would open in late 1915 when the Elkhorn Grade was the primary road between Fresno and Coalinga. The structure would be replaced in 1991 but was left standing as it carries pipelines over Fresno Slough. Part 1; the history of the Teilman Bridge In the early Twentieth Century the most direct highway between Fresno and Coalinga followed the Elkhorn Grade. The Elkhorn Grade began at Fresno Slough a short distance west of Burrell siding. From Fresno Slough the Elkhorn Grade followed a generally southwestern course through San Joaquin Valley into the Kettleman Hills towards Coalinga. The Elkhorn Grade can be seen on the 1914 C.F. Weber map of Fresno Coun...

The Dummy Lights of New York

A relic of the early days of motoring, dummy lights were traffic lights that were placed in the middle of a street intersection. In those early days, traffic shuffled through busy intersections with the help of a police officer who stood on top of a pedestal. As technology improved and electric traffic signals became commonplace, they were also originally positioned on a platform at the center of the intersection. Those traffic signals became known as " dummy lights " and were common until traffic lights were moved onto wires and poles that crossed above the intersection. In New York State, only a handful of these dummy lights exist. The dummy lights are found in the Hudson Valley towns of Beacon and Croton-on-Hudson, plus there is an ongoing tug of war in Canajoharie in the Mohawk Valley, where their dummy light has been knocked down and replaced a few times. The dummy light in Canajoharie is currently...

The William Flinn (not Flynn) Highway - Pittsburgh's Misspelled Street

For decades if you traveled along PA Route 8 in Pittsburgh's North Hills suburbs, you would have noticed signs that read "William Flynn Highway" at every intersection. Even today, many businesses and residences have their addresses listed as XXXX William Flynn Highway. However, it's not William Flynn Highway, it is William FLINN Highway - and the gentleman who it is named for has a long and storied past in Pittsburgh's infrastructure history. William Flinn was born in England in 1851; however later that year, his family emigrated to the United States and would settle in Pittsburgh. A 10-year-old school dropout, Flinn grew interested in politics and would join the Allegheny County Republican Party in 1877 as a ward commissioner and a seat on the Board of Fire Commissioners. Flinn would serve in the Pennsylvania State House of Representatives and Senate from 1877 to 1902. (1) Flinn along with James J. Booth would found the Booth and Flinn construction firm ...