California State Route 267

Leaving Lake Tahoe this weekend I took the entirety of California State Route 267 north towards Truckee and Donner Pass.

CA 267 is a relatively short state highway traversing north from the shore of Lake Tahoe in Placer County 13 miles to I-80/CA 89 located in Truckee in Nevada County. The entirety of CA 267 is signed on Shore Road. Heading north from CA 28 there is a small guide sign showing the distance to Truckee and I-80.

The southern part of CA 267 is known as the Senator Paul J. Lunardi Memorial Highway.

CA 267 northbound ascends on a steep grade to the 7,179 foot Brockway Summit.

CA 267 north from Brockway Summit has a 5 mile downhill grade at 9% to the Truckee River watershed.

The Truckee-Tahoe Airport is on CA 267 just south of the Truckee Town limits at Truckee-Tahoe Airport Road.

A couple hundred feet north of Truckee-Tahoe Airport Road CA 267 enters Nevada County and the town limits of Truckee.

CA 267 northbound traffic is directed towards I-80 in Truckee on the CHP Officer Glenn Carlson Memorial Bypass. The original alignment of CA 267 continued into downtown Truckee on Old Brockway Road and to I-80/CA 89 on Donner Pass Road.

CA 267 crosses the Truckee River and Union Pacific Railroad descending Donner Pass before terminating at I-80/CA 89.

CA 267 is a relatively new State Highway designation having been adopted in Legislative Chapter 1425 in 1965.

CAhighways.org on CA 267

CA 267 first appears on the 1966 State Highway map as a complete State Route but unsigned.

1966 State Highway Map

CA 267 appears to have been signed by 1967.

1967 State Highway Map

According to historicaerials.com the alignment of CA 267 switched from Old Brockway Road/Donner Pass to the CHP Officer Glenn Carlson Memorial Bypass some time between 1994 and 2003.

The future alignment of CA 267 appears as a well maintained county route between Truckee over Brockway Summit to Lake Tahoe on the California Division of Highways maps of Nevada/Placer County in 1935.

1935 Nevada County Highway Map

1935 Placer County Highway Map

Comments

Anonymous said…

I grew up in Tahoe. The bridge bypass was first opened in the early 2000's.

2:16 PM

The 1915-era Teilman Bridge (the only known Concrete Pony Truss Bridge in California)

The Teilman Bridge is a semi-abandoned structure over Fresno Slough west of Burrell siding near the intersection of Elkhorn Avenue and Elkhorn Grade. This structure is the only known Concrete Pony Truss Bridge constructed in California and was designed by Ingvart Teilman. Teilman's Bridge would open in late 1915 when the Elkhorn Grade was the primary road between Fresno and Coalinga. The structure would be replaced in 1991 but was left standing as it carries pipelines over Fresno Slough. Part 1; the history of the Teilman Bridge In the early Twentieth Century the most direct highway between Fresno and Coalinga followed the Elkhorn Grade. The Elkhorn Grade began at Fresno Slough a short distance west of Burrell siding. From Fresno Slough the Elkhorn Grade followed a generally southwestern course through San Joaquin Valley into the Kettleman Hills towards Coalinga. The Elkhorn Grade can be seen on the 1914 C.F. Weber map of Fresno Coun...

The Dummy Lights of New York

A relic of the early days of motoring, dummy lights were traffic lights that were placed in the middle of a street intersection. In those early days, traffic shuffled through busy intersections with the help of a police officer who stood on top of a pedestal. As technology improved and electric traffic signals became commonplace, they were also originally positioned on a platform at the center of the intersection. Those traffic signals became known as " dummy lights " and were common until traffic lights were moved onto wires and poles that crossed above the intersection. In New York State, only a handful of these dummy lights exist. The dummy lights are found in the Hudson Valley towns of Beacon and Croton-on-Hudson, plus there is an ongoing tug of war in Canajoharie in the Mohawk Valley, where their dummy light has been knocked down and replaced a few times. The dummy light in Canajoharie is currently...

The William Flinn (not Flynn) Highway - Pittsburgh's Misspelled Street

For decades if you traveled along PA Route 8 in Pittsburgh's North Hills suburbs, you would have noticed signs that read "William Flynn Highway" at every intersection. Even today, many businesses and residences have their addresses listed as XXXX William Flynn Highway. However, it's not William Flynn Highway, it is William FLINN Highway - and the gentleman who it is named for has a long and storied past in Pittsburgh's infrastructure history. William Flinn was born in England in 1851; however later that year, his family emigrated to the United States and would settle in Pittsburgh. A 10-year-old school dropout, Flinn grew interested in politics and would join the Allegheny County Republican Party in 1877 as a ward commissioner and a seat on the Board of Fire Commissioners. Flinn would serve in the Pennsylvania State House of Representatives and Senate from 1877 to 1902. (1) Flinn along with James J. Booth would found the Booth and Flinn construction firm ...

Gribblenation

Search This Blog